GENETEC Reviews

Cumminstech2 said:
Idk how you got that or why you chose to take it personally, I just stated that I disagree and why I disagree.

The boards are for sharing information. I have experience brewing and I am very familiar with the process and I don’t think you are correct, so I stated such. It’s not an argument it’s just different information. I’d be very curious and open as to why you think that UGL injections cannot compare to pharma though if you are willing to share 🤷‍♂️
Click to expand...
Maybe you are very good at brewing, and use minimal ba

Also higher concentrations can cause issues, different carrier oils, more ba and so on.

All I know is I can pin belly fat with pharma, and so far I can’t do it with any UGL. My thought is not because they are bad at brewing, but the higher concentration gives issues.

For example you ever injected 200 mg/ml primo?

Nothing personal, sorry I’m just a bit bitchy today.
 
Last edited:
Sorbate said:
Maybe you are very good at brewing, and use minimal ba

Also higher concentrations can cause issues, different carrier oils, more ba and so on.

All I know is I can pin belly fat with pharma, and so far I can’t do it with any UGL. My thought is not because they are bad at brewing, but the higher concentration gives issues.

For example you ever injected 200 mg/ml primo?

Nothing personal.
Click to expand...

Im not trying to make this personal or directed at you either so I hope you don’t take it that way

yeah I homebrewed my primo at 200mg/ml and currently pin 1 full cc per week. It’s smooth, I draw it and pin it with the same 27g insulin pin. Haven’t had an issue with it yet, get the odd sore shot here and there but I think that’s more technique and shaky hands on my end.

Higher concentrations can cause issues for sure.

But say that pharmaceutical company X brewed their test decanoate at 200mg/ml with 15% BB and 1.6% BA and used cottonseed oil for a carrier

UGL X can make a completely identical replica of Pharma X by copying carrier and solvent and concentrations

infact I can make a completely identical clone in my kitchen with minimal equipment all obtained off of Amazon

assuming quality of raws are the same, which I don’t see why they couldn’t be. There are a couple great raw sources out there, and also a couple really bad ones.

Personally I’d say genetec is a top lab, one of the better options around, and I can’t see them making sub par injectable solutions. They could very well supply pharmaceutical companies with testosterone id even say (although I’m sure they have no intention on it)

I think the complaint of discomfort upon injection is more to do with the choice of carrier oil itself, and not the preparation of a UGL compared to a pharma lab.
 
Cumminstech2 said:
Im not trying to make this personal or directed at you either so I hope you don’t take it that way

yeah I homebrewed my primo at 200mg/ml and currently pin 1 full cc per week. It’s smooth, I draw it and pin it with the same 27g insulin pin. Haven’t had an issue with it yet, get the odd sore shot here and there but I think that’s more technique and shaky hands on my end.

Higher concentrations can cause issues for sure.

But say that pharmaceutical company X brewed their test decanoate at 200mg/ml with 15% BB and 1.6% BA and used cottonseed oil for a carrier

UGL X can make a completely identical replica of Pharma X by copying carrier and solvent and concentrations

infact I can make a completely identical clone in my kitchen with minimal equipment all obtained off of Amazon

assuming quality of raws are the same, which I don’t see why they couldn’t be. There are a couple great raw sources out there, and also a couple really bad ones.

Personally I’d say genetec is a top lab, one of the better options around, and I can’t see them making sub par injectable solutions. They could very well supply pharmaceutical companies with testosterone id even say (although I’m sure they have no intention on it)

I think the complaint of discomfort upon injection is more to do with the choice of carrier oil itself, and not the preparation of a UGL compared to a pharma lab.
Click to expand...
You must be a master at brewing if you can brew 200 mg/ml primo without pip, lol.
Shit even the guys who own labs wont take that on.

But yeah, they could do everything the same, but 250 test is higher concentration that 200, or 100 test, and I still think that thats the reason.
But I don’t want to fuck up genetics review thread anymore.
If you want you can start another thread on this.

Btw, genetec is a great lab. I was never implying they were not.
 
Sorbate said:
You must be a master at brewing if you can brew 200 mg/ml primo without pip, lol.
Shit even the guys who own labs wont take that on.

But yeah, they could do everything the same, but 250 test is higher concentration that 200, or 100 test, and I still think that thats the reason.
But I don’t want to fuck up genetics review thread anymore.
If you want you can start another thread on this.

Btw, genetec is a great lab. I was never implying they were not.
Click to expand...

I’m no master, just a regular dude. 200mg/ml primo isn’t that difficult to make at all. @Skarpyona makes 200mg/ml primobolan with no ethyl oleate or super solvents at all. I use ethyl oleate in mine because it holds very well and is thin and I tolerate it well.

Lots of homebrewers on meso brew their primo at 200mg/ml and I’ve even seen 250mg/ml. It is very very expensive though, which probably makes it unfeasible for a lab to produce and sell. I don’t know if many people wanna pay $200 for 1 bottle of gear, when your gonna need like 7-8 bottles for a cycle.
 
Cumminstech2 said:
I’m no master, just a regular dude. 200mg/ml primo isn’t that difficult to make at all. @Skarpyona makes 200mg/ml primobolan with no ethyl oleate or super solvents at all. I use ethyl oleate in mine because it holds very well and is thin and I tolerate it well.

Lots of homebrewers on meso brew their primo at 200mg/ml and I’ve even seen 250mg/ml. It is very very expensive though, which probably makes it unfeasible for a lab to produce and sell. I don’t know if many people wanna pay $200 for 1 bottle of gear, when your gonna need like 7-8 bottles for a cycle.
Click to expand...
Why would it cost anymore to run a cycle?
let’s say 100 mg/ml costs 70, so 200 would be 140. So if you used 400 mg a week , the cost would be the same. You just inject less.
Sorry but it doesn’t make sense.
If primo could be made at 200, every lab would do it, well because all of us primo users would love to reduce our injection volume.
It wouldn’t be too hard to calculate your cost per mg to figure out what your cycle would cost.
This is my last reply,
you won’t to discuss this, open a new thread and tag me, we can continue there.
 
  • Like
Reactions: 3ml
Sorbate said:
Why would it cost anymore to run a cycle?
let’s say 100 mg/ml costs 70, so 200 would be 140. So if you used 400 mg a week , the cost would be the same. You just inject less.
Sorry but it doesn’t make sense.
If primo could be made at 200, every lab would do it, well because all of us primo users would love to reduce our injection volume.
It wouldn’t be too hard to calculate your cost per mg to figure out what your cycle would cost.
This is my last reply,
you won’t to discuss this, open a new thread and tag me, we can continue there.
Click to expand...

Are you trying to say 200mg/ml primo is impossible to make? Cause myself and many other home brewers including members of this very forum brew it all of the time. There’s a couple of well reviewed Canadian domestic labs who offer it. Have you ever even tried brewing it yourself to know it won’t hold or will hurt or whatever you think is gonna happen?
 
Cumminstech2 said:
Are you trying to say 200mg/ml primo is impossible to make? Cause myself and many other home brewers including members of this very forum brew it all of the time. There’s a couple of well reviewed Canadian domestic labs who offer it. Have you ever even tried brewing it yourself to know it won’t hold or will hurt or whatever you think is gonna happen?
Click to expand...
just to chime in... i have a buddy who is fairly new to brewing and gave me some 200mg/ml primo and it was infact...pip free or 95% pip free...
 
Last edited:
Cumminstech2 said:
Are you trying to say 200mg/ml primo is impossible to make? Cause myself and many other home brewers including members of this very forum brew it all of the time. There’s a couple of well reviewed Canadian domestic labs who offer it. Have you ever even tried brewing it yourself to know it won’t hold or will hurt or whatever you think is gonna happen?
Click to expand...
200mg/ml primo is delightful!!
 
Choloracing09 said:
I switched to the Taro today and pinned 0.5ml into my right lat. 7 hours later and no pain. Compared to yesterday the pip was intense around this time. Felt like I was getting cold (full body soreness) based on how my body was reacting to it. This morning wasn’t as bad, still sore now but it’s better. Based on that trial I sure my my body isn’t a fan of the carrier oil Genetech uses. Thanks for the help and suggestions fellas. Much appreciated
Click to expand...
This is a Genetec review thread
Not Genetech
 
Cumminstech2 said:
Are you trying to say 200mg/ml primo is impossible to make? Cause myself and many other home brewers including members of this very forum brew it all of the time. There’s a couple of well reviewed Canadian domestic labs who offer it. Have you ever even tried brewing it yourself to know it won’t hold or will hurt or whatever you think is gonna happen?
Click to expand...
Like @Sorbate was trying to do is not clutter the thread
Take it elsewhere please
 
Alright - I've been meaning to leave a new review for a while now; this review will sum up my last couple interactions with this lab, as well as the blast I'm just finishing up.

First off, there are few, if any, more professional and courteous than the rep for Genetec. He's quick to respond, and actually cares about his customers.

I had a small issue with my previous order, nothing major at all (the product worked as it should have). Genetec asked me how the blast was going, and I mentioned how well everything was working, including the small issue. He immediately offered to "make things right." In my mind, nothing was wrong at all (like I said, absolutely tiny issue). I won't go into details, but he ALWAYS goes above and beyond to make sure customers are happy with everything - from the product itself to the customer service.

Most recently, I'm finishing up the aforementioned blast of anadrol, tren ace, and sust. Everything worked as expected. Strength from the anadrol came on FAST and hard. Mind blown. 75mg/d for 3 weeks killed my appetite and I had to cut it short. Staying just as lean now at close to 260 as I've ever been. Strength still going up as the blast comes to an end.

This is a lab that cares. They take pride. Glad to say I'm a customer of theirs :)
 
Scott226 said:
Does anyone have the rep contact? I would like to place an order
Click to expand...

please take the time to read the rules

www.canadianbrawn.com

Canadian Brawn Rules

Please read and acknowledge that you have read, you have understood and agree to follow the rules of this site. As a member of Canadian Brawn I agree: 1. To respect fellow members. Please be respectful towards forum members and moderators. If you have a problem with another board member...
www.canadianbrawn.com www.canadianbrawn.com

asking for a source like this is not allowed on my forum
stick around and contribute and make friends
because friends help friends :)

and also give this a read

www.canadianbrawn.com

The Zen of Body Building Forums (advice from an old bull)

The Zen of Body Building Forums (advice from an old bull) So you set off one day on a search for what could be considered the holy grail an internet source for AAS. You fire up your google search engine and start plugging in key words and google does what google does best and spits out url...
www.canadianbrawn.com www.canadianbrawn.com
 
Just throwing my 2 cents in, as a long-term, devoted customer; Genetec is as professional, responsive and even fun to deal with as we all know and expect. Even the higher concentration blends are smooth (albeit, a touch thicker than I remember - nbd really) and seem to feel, physiologically, on point. No experience with their ancillaries/orals, although I've had motility tests done while running their HCG - passed with flying colours.
 
Been a while since I made a genetec purchase, but I just put in an order and I cannot say enough good about this lab and how professional and courteous they are. It's always a pleasure to deal with them. And the products never disappoint. I've literally never had a product from genetec I didn't think was as it should be. The price is right and the gear is solid. 100% trustworthy.

Cheers.
 
I’ve been reading a lot of great reviews about this lab and one of the main things that people mention is their response time being very quick and them being very communicative. Unfortunately, I’ve been trying to get in contact with GENETEC but I haven’t received a response in 9 days now and I’ve messaged them several times. I am not sure if I am the only one having this problem but It kinda sucks, I was hoping to place an order with them a week ago. Hopefully I get in touch and can write a review on their products but for now, communication wise, it’s not a positive experience for me so far.
 
lgetlegend said:
I’ve been reading a lot of great reviews about this lab and one of the main things that people mention is their response time being very quick and them being very communicative. Unfortunately, I’ve been trying to get in contact with GENETEC but I haven’t received a response in 9 days now and I’ve messaged them several times. I am not sure if I am the only one having this problem but It kinda sucks, I was hoping to place an order with them a week ago. Hopefully I get in touch and can write a review on their products but for now, communication wise, it’s not a positive experience for me so far.
Click to expand...


Genetec has set the standard for customer service
few labs equal them but none surpass them

so there can be lots of reasons for this

you might have the wrong email address
your email may have been seen as spam by their email system
it could be your new and they do not know you and as such are hesitant to do business selling an illegal product to a stranger
or omg mistake do happen. maybe they read it got busy and did not notice it

proper step is to take this to a admin which is one thing you did
then wait for the admin to look into it for you
posting it looking for an answer is not the right move given this could be some trivial error as I pointed out above
 
You must log in or register to reply here.
Top